Constant Temperature and Humidity Adhesive Tape Holding Force Tester, for Testing the Anti-blocking Property of Test Specimens

The Constant Temperature and Humidity Holding Power Tester is mainly used to test the adhesive holding performance and anti-sticking ability of pressure-sensitive tapes under different environmental conditions. Samples are attached to the test plates with standard weights applied to the lower ends. After a specific period, the tester measures the tape’s sliding distance or adhesion duration to evaluate the retention performance. The system can simulate various environmental conditions such as high temperature and humidity, low temperature and humidity, or combinations thereof. With precise PID control and touchscreen interface, it provides stable and accurate environmental simulation for adhesive performance testing.

Applicable Standards
Complies with GB/T2423.1-4, GJB150A1/4, IEC68-2-30, GB/T4851, and HG/T2492-2005 standards.

Controller and Operation Features

• Color LCD touchscreen display with multilingual interface (English/Chinese).
• Program editing for temperature and humidity profiles with real-time graphical curves.
• Supports time-based control, external logic control, and scheduled operation.
• Automatic data recording, fault detection, and alarm display.
• Built-in safety systems prevent overheating and ensure stable operation.

Maintenance & Safety

• Keep the chamber clean before and after each test.
• Apply anti-rust oil weekly on metal parts and lubricate screws monthly.
• Use pure or RO water for humidification to avoid scaling.
• Do not use in direct sunlight, high dust, or high vibration environments.
• Ensure proper grounding and avoid solvent cleaning agents.